← Feature Explorer
FOW-PRO-078High
Propellant Casting – Line A
Propellant Casting – Line A: design, construction and commissioning within a defense energetics production facility.
Most Restrictive Requirement
UFC 3-340-02UFC 3-340-02 blast criteria governs all structural requirements regardless of less restrictive standards.
Design Criteria
Illustrative values — confirm against the cited edition before design use.
Summary
- Discipline
- Process Engineering
- Category
- Process
- Risk Level
- High
- Approval Authority
- Army Explosives Safety Office
- Standards Applied
- 17 across 13 families
- Verified Links
- 4 of 17 approved
- Common Equipment
- Solvent Recovery Unit, Hydraulic Press, Ram Extruder, Vertical Planetary Mixer
Applicable Standards (17)
Structural
- UFCUFC 3-340-02governsReviewedStructures to Resist the Effects of Accidental Explosions
- EurocodeEN 1991-1-7ApprovedAccidental Actions (Impact and Explosions)
- UFCUFC 3-310-04ReviewedSeismic Design of Buildings
- EurocodeEN 1997DraftGeotechnical Design
Explosives Safety
- DOT49 CFR 173.56DraftNew Explosives — Definition and Procedures for Classification and Approval
- DoDDDESB Site Plan GuideDraftExplosives Safety Site Plan Submission Guidance
- DoDDESR 6055.09DraftDoD Explosives Safety Regulation (Volumes 1–8)
Fire Protection
- NFPANFPA 15ReviewedWater Spray Fixed Systems
Hazardous Areas
- NFPANFPA 654ReviewedPrevention of Fire and Dust Explosions
- NECNEC Art. 506ApprovedZone 20, 21, 22 Locations
- IECIEC 60079-14ReviewedElectrical Installations Design in Ex Areas
- ATEX1999/92/ECReviewedATEX Workplace Directive
- DINDIN EN 14373DraftExplosion Suppression Systems
Process Safety
- EU2012/18/EUDraftSeveso III Directive — Control of Major-Accident Hazards
- OSHA29 CFR 1910.119DraftProcess Safety Management of Highly Hazardous Chemicals
- ASMEASME B31.3ApprovedProcess Piping
Functional Safety
- VDIVDI 2180ApprovedSafeguarding of Industrial Process Plants
Governing Authorities
- LeadArmy Explosives Safety OfficeExplosives Safety Authority · Site plans, QD arcs, explosives safety submissions
- Fire Protection EngineerQualified Fire Protection Engineer · Fire suppression, detection, life safety
- Army Safety CenterSafety Oversight · System safety and hazard analysis review
Highest Risk Items
- Accidental detonation during mixingCriticalRemote operation, shielding per UFC 3-340-02, and explosives safety review prior to start-up.
Known U.S. / European Conflicts (21)
DESR 6055.09↔UK ER 2014· Explosives separation distancesSignificant Difference
UK uses HSE separation tables by hazard type; apply the more restrictive distance per exposure and document both.
DESR 6055.09↔SprengG· Explosives licensing and storagePartial
German storage groups map loosely to HD; host-nation licensing is required in addition to DDESB site plan.
DESR 6055.09↔2. SprengV· Storage separation distancesPartial
Compare Lagergruppe distances to DESR QD; use larger value.
29 CFR 1910.119↔2012/18/EU· Major hazard / process safetyPartial
Seveso requires public safety report and land-use planning beyond PSM.
NEC Art. 505↔IEC 60079-14· Zone installationsSimilar
Requirements broadly equivalent; document equivalency in design analysis.
UFC 3-340-02↔EN 1991-1-7· Accidental explosion loadsSignificant Difference
Fundamental differences; requires AHJ/NRTL review and likely redesign or re-certification.
NFPA 69↔DIN EN 14373· Explosion suppressionPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 654↔VDI 2263· Combustible dustPartial
Partial alignment; supplemental U.S. testing or documentation required.
ASME B31.3↔EN 13480· Process pipingPartial
Partial alignment; supplemental U.S. testing or documentation required.
29 CFR 1910.119↔1999/92/EC· Process safety / workplace explosionSignificant Difference
Fundamental differences; requires AHJ/NRTL review and likely redesign or re-certification.
UFC 3-310-04↔EN 1998· Seismic designPartial
Partial alignment; supplemental U.S. testing or documentation required.
NEC Art. 506↔IEC 60079-10-2· Dust zone classificationSimilar
Requirements broadly equivalent; document equivalency in design analysis.
UFC 4-020-01↔IEC 60079-14· Motor efficiencyPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 654↔EN 1993· Emergency stop circuitsPartial
Partial alignment; supplemental U.S. testing or documentation required.
IEEE 142↔IEC 60079-14· Transformer designPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFGS 25 05 11↔IEC 60079-14· Fire dampersPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFGS 28 31 76↔IEC 60079-14· Lifting gearPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 20↔IEC 60079-14· Grounding gridsPartial
Partial alignment; supplemental U.S. testing or documentation required.
NEC Art. 506↔EN 1993· Anchor boltsPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFC 3-401-01↔IEC 60079-14· HydrotestPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 15↔2014/34/EU· Leak testingPartial
Partial alignment; supplemental U.S. testing or documentation required.