DECMS
ProjectsSign in
  1. ✓Find scope
  2. 2Governing rule
  3. 3Resolve conflicts
  4. 4Verify equipment

Step 2: Read the governing requirement. On the feature page, start with the Most Restrictive Requirement, then review applicable standards and the lead authority.

Full guideNext: Resolve conflicts →
← Feature Explorer
FOW-VEN-061High

Dust Collection – Building 200

Dust Collection – Building 200: design, construction and commissioning within a defense energetics production facility.

Most Restrictive Requirement
NFPA 654

NFPA 654 / NFPA 652 dust hazard analysis governs dust handling; ATEX zoning alone is not accepted.

Design Criteria

Hazard Division
1.2
NFPA 654 Table 3-1
Max Net Explosive Weight
250 lb NEW
NFPA 654 Para. 4.2
Inhabited Building Distance
670 ft
NFPA 654 Table 8-9
Hazardous Area Classification
Class I Div 2 / Zone 2
NFPA 654 Art. 500/505
Required SIL
SIL 2
NFPA 654 IEC 61511 §9
Sprinkler / Deluge Density
0.30 gpm/ft²
NFPA 654 Ch. 11

Illustrative values — confirm against the cited edition before design use.

Summary

Discipline
Mechanical
Category
Ventilation
Risk Level
High
Approval Authority
Fire Protection Engineer
Standards Applied
7 across 4 families
Verified Links
3 of 7 approved
Common Equipment
Hazardous Exhaust Fan, Explosion Vent Panel, Thermal Oxidizer

Applicable Standards (7)

Hazardous Areas
Environmental

Governing Authorities

  • Fire Protection Engineer
    Qualified Fire Protection Engineer · Fire suppression, detection, life safety
    Lead
  • EPA
    Federal Environmental Regulator · Air permits, RCRA hazardous waste

Highest Risk Items

  • Dust deflagration in collection systemCritical
    Remote operation, shielding per UFC 3-340-02, and explosives safety review prior to start-up.
  • Incorrect area classificationHigh
    Engineering controls, third-party verification and AHJ acceptance testing.

Known U.S. / European Conflicts (5)

NFPA 654↔VDI 2263· Combustible dustPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 496↔IEC 60079-2· Pressurized enclosuresSimilar
Requirements broadly equivalent; document equivalency in design analysis.
NFPA 654↔EN 1993· Emergency stop circuitsPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFC 3-810-01N↔EN 1993· Exhaust stacksPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 496↔2014/34/EU· Surge protectionPartial
Partial alignment; supplemental U.S. testing or documentation required.

Equipment Impacted (3)

Hazardous Exhaust FanExplosion Vent PanelThermal Oxidizer