← Feature Explorer
FOW-ENV-048Medium
Air Emissions Control – Building 100
Air Emissions Control – Building 100: design, construction and commissioning within a defense energetics production facility.
Most Restrictive Requirement
40 CFR 264RCRA Subpart X permit conditions govern treatment of energetic waste.
Design Criteria
Illustrative values — confirm against the cited edition before design use.
Summary
- Discipline
- Environmental
- Category
- Environmental
- Risk Level
- Medium
- Approval Authority
- EPA
- Standards Applied
- 6 across 4 families
- Verified Links
- 2 of 6 approved
- Common Equipment
- Wet Scrubber
Applicable Standards (6)
Process Safety
- OSHA29 CFR 1910.119ReviewedProcess Safety Management of Highly Hazardous Chemicals
- ASMEASME B31.3ApprovedProcess Piping
Environmental
- EU2010/75/EUDraftIndustrial Emissions Directive (IED)
- EPA40 CFR 70DraftState Operating Permit Programs (CAA Title V)
- EPA40 CFR 264governsApprovedRCRA Hazardous Waste TSD Facilities
- EPA40 CFR 68DraftRisk Management Program
Governing Authorities
- LeadEPAFederal Environmental Regulator · Air permits, RCRA hazardous waste
- Arkansas DEQState Environmental Authority · State air and water permits
Highest Risk Items
- Hazardous waste permit violationMediumAdministrative controls, periodic inspection and documented procedures.
- Toxic solvent vapor exposureMediumAdministrative controls, periodic inspection and documented procedures.
Known U.S. / European Conflicts (5)
40 CFR 70↔2010/75/EU· Air emissions permittingPartial
IED requires BAT conclusions; Title V does not. Prepare BAT assessment for EU sites.
29 CFR 1910.119↔2012/18/EU· Major hazard / process safetyPartial
Seveso requires public safety report and land-use planning beyond PSM.
ASME B31.3↔EN 13480· Process pipingPartial
Partial alignment; supplemental U.S. testing or documentation required.
29 CFR 1910.119↔1999/92/EC· Process safety / workplace explosionSignificant Difference
Fundamental differences; requires AHJ/NRTL review and likely redesign or re-certification.
40 CFR 68↔EN 1993· Hazardous waste labelingPartial
Partial alignment; supplemental U.S. testing or documentation required.