← Feature Explorer
FOW-ELE-040Medium
Lightning Protection – Building 100
Lightning Protection – Building 100: design, construction and commissioning within a defense energetics production facility.
Most Restrictive Requirement
NFPA 70NEC Class/Division classification governs; IEC Zone equipment requires NRTL listing.
Design Criteria
Summary
- Discipline
- Electrical
- Category
- Electrical
- Risk Level
- Medium
- Approval Authority
- Electrical Safety Authority
- Standards Applied
- 11 across 7 families
- Verified Links
- 4 of 11 approved
- Common Equipment
- Purged Enclosure (Type X), Lightning Protection System, Variable Frequency Drive, Pad-Mounted Transformer
Applicable Standards (11)
Electrical
- NFPANFPA 70governsDraftNational Electrical Code
- UFGSUFGS 26 05 00ReviewedCommon Work Results for Electrical
- UFGSUFGS 26 32 15DraftDiesel-Generator Set Stationary
- NFPANFPA 70EApprovedElectrical Safety in the Workplace
- IEEEIEEE 519ReviewedHarmonic Control in Power Systems
- IEEEIEEE 80ReviewedSafety in AC Substation Grounding
Hazardous Areas
- NFPANFPA 654ApprovedPrevention of Fire and Dust Explosions
- NECNEC Art. 506ReviewedZone 20, 21, 22 Locations
- IECIEC 60079-14DraftElectrical Installations Design in Ex Areas
- ATEX1999/92/ECApprovedATEX Workplace Directive
- DINDIN EN 14373ApprovedExplosion Suppression Systems
Governing Authorities
- LeadElectrical Safety AuthorityElectrical AHJ · Electrical installations, arc flash, hazardous locations
- Installation DPWDirectorate of Public Works · Utilities tie-in, O&M acceptance
- AHJAuthority Having Jurisdiction · Code interpretation and final acceptance
Highest Risk Items
- Arc flash at switchgearHighEngineering controls, third-party verification and AHJ acceptance testing.
- Lightning strike in explosive areaMediumAdministrative controls, periodic inspection and documented procedures.
Known U.S. / European Conflicts (16)
NFPA 70↔IEC 60364· Low-voltage installationsPartial
Partial alignment; supplemental U.S. testing or documentation required.
NEC Art. 505↔IEC 60079-14· Zone installationsSimilar
Requirements broadly equivalent; document equivalency in design analysis.
NFPA 69↔DIN EN 14373· Explosion suppressionPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 654↔VDI 2263· Combustible dustPartial
Partial alignment; supplemental U.S. testing or documentation required.
29 CFR 1910.119↔1999/92/EC· Process safety / workplace explosionSignificant Difference
Fundamental differences; requires AHJ/NRTL review and likely redesign or re-certification.
NEC Art. 506↔IEC 60079-10-2· Dust zone classificationSimilar
Requirements broadly equivalent; document equivalency in design analysis.
UFC 4-020-01↔IEC 60079-14· Motor efficiencyPartial
Partial alignment; supplemental U.S. testing or documentation required.
NFPA 70↔DIN EN ISO 13849-1· Enclosure ratingsSimilar
Requirements broadly equivalent; document equivalency in design analysis.
NFPA 654↔EN 1993· Emergency stop circuitsPartial
Partial alignment; supplemental U.S. testing or documentation required.
IEEE 142↔IEC 60079-14· Transformer designPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFGS 25 05 11↔IEC 60079-14· Fire dampersPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFGS 28 31 76↔IEC 60079-14· Lifting gearPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFGS 26 05 00↔EN 764-7· UPS systemsSignificant Difference
Fundamental differences; requires AHJ/NRTL review and likely redesign or re-certification.
NFPA 20↔IEC 60079-14· Grounding gridsPartial
Partial alignment; supplemental U.S. testing or documentation required.
NEC Art. 506↔EN 1993· Anchor boltsPartial
Partial alignment; supplemental U.S. testing or documentation required.
UFC 3-401-01↔IEC 60079-14· HydrotestPartial
Partial alignment; supplemental U.S. testing or documentation required.